A variation of the compression and tension load cells with a 'through-hole' design are made for installation around bolts or shafts. Fully welded stainless steel construction and high overload capability for optimum performance. Available capacity range is from 50kg to 5t with accuracy from 0.25% to 0.50%. Widely used for measuring of clamping forces, bolt loading and overload monitoring
Features
Pancake type load cell.
Alloy steel / stainless steel
Tension and compression application, capacity is able to be customized
Mainly used for automotive press fit, automated assembly, 3C products testing, new energy product assembly, medical testing, robotics, mold assembly and other industrial testing and control system; this also is applicable to testing machine, truck scale, hopper scale, a variety of industrial weighing systems
High dynamic response frequency
| Specifications | Technique |
| Capacity（kg） | 50/200/500/1000/2000/5000 |
| Accuracy class | C3 |
| Output sensitivity (=FS) | 2.0±10%mV/V |
| Zero balance | ±2.0%F.S. |
| Non-linearity | ±0.5%F.S. |
| Hysteresis | ±0.3%F.S. |
| Creep(30min) | ±0.1%F.S. |
| Temp.effect on output | ±0.05%F.S./10℃ |
| Temp.effect on zero | ±0.05%F.S./10℃ |
| Response frequency | 10kHz |
| Impedance | 700Ω |
| Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5~10V |
| Compensated temp range | -10~40℃ |
| Operation temp range | -20~80℃ |
| Safe overload | 120%F.S. |
| Ultimate overload | 150%F.S. |
| Cable size | Φ5*3000mm |
| Material | Alloy Steel |
| IP Class | IP65 |
A variation of the compression and tension load cells with a 'through-hole' design are made for installation around bolts or shafts. Fully welded stainless steel construction and high overload capability for optimum performance. Available capacity range is from 50kg to 5t with accuracy from 0.25% to 0.50%. Widely used for measuring of clamping forces, bolt loading and overload monitoring
Features
Pancake type load cell.
Alloy steel / stainless steel
Tension and compression application, capacity is able to be customized
Mainly used for automotive press fit, automated assembly, 3C products testing, new energy product assembly, medical testing, robotics, mold assembly and other industrial testing and control system; this also is applicable to testing machine, truck scale, hopper scale, a variety of industrial weighing systems
High dynamic response frequency
| Specifications | Technique |
| Capacity（kg） | 50/200/500/1000/2000/5000 |
| Accuracy class | C3 |
| Output sensitivity (=FS) | 2.0±10%mV/V |
| Zero balance | ±2.0%F.S. |
| Non-linearity | ±0.5%F.S. |
| Hysteresis | ±0.3%F.S. |
| Creep(30min) | ±0.1%F.S. |
| Temp.effect on output | ±0.05%F.S./10℃ |
| Temp.effect on zero | ±0.05%F.S./10℃ |
| Response frequency | 10kHz |
| Impedance | 700Ω |
| Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5~10V |
| Compensated temp range | -10~40℃ |
| Operation temp range | -20~80℃ |
| Safe overload | 120%F.S. |
| Ultimate overload | 150%F.S. |
| Cable size | Φ5*3000mm |
| Material | Alloy Steel |
| IP Class | IP65 |
